Description:

GFC 101 is a first of its kind temperature controller with auto ignition system, specifically designed and customized for storage type Gas boiler and gas heaters or gas geysers. GFC series temperature controller are fully automatic capable of maintaining the temperature of the heating material (water, oil and as such) as per user defined set points. Simple programmable hysteresis based controller maintains temperature which results in gas consumption, hence reducing the cost of ownership along with helping the environment.

The customized design gives the boiler manufacturer the ability to easily integrate this system into their own, new or existing design, by performing simple modifications. The internal battery backup system gives the end user availability of hot water even in the absence of mains power for at least 2 days depending upon the mode of operation.

Its special and unique features include availability of hot water at preset amount of time duration. Auto ignition system removes the need of continuous pilot flame minimizing further gas consumption. Auto ignition system (AKA sequence controller) is also included in the package.

• Modular design for easy installation and inter connection
• External NTC temperature sensor probe with exterior BSP thread for easy installation
• User adjustable set point temperature
• Internal calibrated Real Time Clock with +/- 20 ppm accuracy
• Multiple 24 hour timers with individual set point for preset heating control
• Automatic flame detection and ignition control
• Connection support for 3Volt solenoid valve for gas supply control. Only to be used with low pressure (<=2.942 kN/m2 according to Indian Standard IS 9798:1995) regulators/domestic regulators or natural gas pipe lines
• LCD display with backlight for displaying various information
• Programmable upper temperature lock based on end device as per manufacturer’s need.
• LED indicators for Power, Charging and Flame detection
• Auto system diagnose with different set of errors and massages with capability to store last non-repetitive five sets of error codes for the purpose of troubleshooting
• In built temperature controlled Li-Ion battery charging system with auto charge cutoff and charge fault function
• Option for remote switch integration

Description:

Anlon has designed a special overhead stirrer to suit many stirring and mixing needs for your lab. For lower (lower than water) to higher (as high as honey) viscosities and for smallest (500ml) to biggest volume (5000ml) Anlon Overhead Stirrer performs excellently. Anlon overhead stirrer stands out due to their indispensable easy to use feature set.

The complete overhead stirrer is designed into one single unit making it much easier to use and consumes less space in the lab, especially while using it in hood/ventilation unit. Back and bottom end of the entire product is made out of SS304 providing strength and stability under heavy load operation while the casing is made out of Teflon coated aluminum to reduce extra weight to the chassis.

Touch operating panel with bright OLED display gives an edge over conventional panels in terms of long operation life, easy use, elegant look and low maintenance requirement. Capacitive touch used in touch panel is widely used and proven touch technology with toughened glass for long life application.

An Inbuilt high power brushless stepper motor gives precise RPM control with a control range between 50 to 700 RPM. The motor controller implements acceleration slopes for much smoother start/stop of motor while avoiding unwanted motor stall.

• Timer and countdown function for 99 Hours
• Three different modes of stirring - Forward, Reverse and Spin
• Automatic motor stall detection and buzzer indication
• Keyless chuck for easy installation of the stirring road
• Auto resume of stirring control after power restore in case of power cut
• Optional external temperature sensor interface
• Designed for unsupervised operation
• Teflon powder coated chassis for longer operations

Description:

This Magnetic stirrer with hot plate is one of the high end design, built with cutting edge technology to provide immense amount of feature sets to the end user while keeping the cost of ownership as low as possible. The simple yet ergonomic design makes it possible to use the device right out of the box with ease.

The system implements a high end user interface - protected under toughened leak proof glass with OLED display for wide angle and distant viewing, a touch button interface for controlling different parameters and an internally sealed leak proof knob for RPM control of stirring for easy operation under those harsh chemical environments.

Integrated temperature control feature enables connection of temperature probe, Placed directly in the medium, to control medium temperature with a high degree of precision. PTFE coated stainless steel hot plate reaching the temperature up to 290 ℃, enables rapid heating and long term usage without any corrosion. A separate temperature sensor is integrated into the hot plate to provide external temperature probe less operations while further ameliorating control accuracy. Both the external temperature sensor probe and the internal hot plate temperature sensor boasts the temperature accuracy of +/- 0.5℃ up to 150 ℃ and +/- 0.75 ℃ up to 300 ℃ with temperature precision of 0.05 ℃.

An integrated USB interface gives user an edge to upgrade the device with improved software versions in the field while also allowing one to acquire process data for further analysis and proof. An onboard nonvolatile storage memory enables device to store the data offline so that they can be collected later on via USB interface, giving user a unique advantage to collect data after the process has finished and a proof to confirm the results. This feature help users in performing long hours of unsupervised process control.

An Inbuilt high power brushless stepper motor gives precise RPM control with a control range between 50 to 1200 RPM. The motor controller implements acceleration slopes for much smoother start/stop of motor while avoiding unwanted motor stall and needle decoupling. High temperature magnets makes it possible to stir at high temperatures and for long hours without losing magnetic strength. The stirring system supports needle size ranging from 1cm to 6 cm in length with stirring volume up to 5 liters of H2O.

As a safety feature current temperature is displayed when the unit is switched off but surface is still hot. The display turns OFF when the hot plate surface temperature goes below 50 ℃. For safe operation two more separate temperature sensors will monitor the temperature of motor and temperature of device case.

• Industrial standard USB-B for online parameter logging and on the field upgradability of future software updates though PC/Laptop
• First of its kind on board memory for process parameter logging in the stirrer and later on downloading though USB to computer/laptop
• Self-learning dynamic load Auto tune PID temperature control for accurate temperature control
• Weather proof M-16 aviation plug connector for fastening external temperature sensor probe
• Timer and countdown function for 99 Hours
• Auto resume of process control after power restore in case of power cut
• Designed for unsupervised operation
• Notification of achieving process temperature set point via beep of onboard buzzer
• Internal battery backup for hot surface indication after the unit is switched off.
• Teflon powder coated SS-304 metal body for longer life, ideal for in Lab and Plant use.
• Brushless DC motor for long life operation

Description:

Anlon Heating bath is best choice when it comes to “heating and tempering in the lab”. This bath is one of the high end design, built with cutting edge technology to provide immense amount of feature sets to the end user while keeping the cost of ownership as low as possible. The simple yet ergonomic design makes it possible to use the device with Overhead stirrer, Rotary evaporator as a pair without any hassle. Functionality, safety and long operational life cycle are taken into consideration in design aspect.

Heating bath is made of duel jacket to avoid burn while using it. Bath is designed in such way that outer jacket is always cool while inner side as hot as 200℃.Bath can be used with Oil or water as heating fluid. Inner wall is insulated with low thermal conductive Ceramic Fiber to reduce heat loses while in operation. This result lower cost of operation.

Immersion heater element increases temperature very fast, lead to shorter time to reach set value. Temperature sensor is also immersed in fluid which accurately measure fluid temperature with no time delay. Due to this fact temperature control is much smoother and precise in tune of +/-1℃ with very low overshoot or undershoot from set value.

Touch operating panel with bright OLED display gives an edge over conventional panels in terms of long operation life, easy use, elegant look and low maintenance requirement. Capacitive touch used in touch panel is widely used and proven touch technology with toughened glass for long life application.

Heating bath jackets are made of Teflon powder coated SS-304 with goal of longer life in corrosive environment and sturdiness of the product.

• Industrial standard USB-B for online parameter logging and on the field upgradability of future software updates though PC/Laptop
• First of its kind on board memory for process parameter logging in the stirrer and later on downloading though USB to computer/laptop
• Self-learning dynamic load Auto tune PID temperature control for accurate temperature control
• Timer and countdown function for 99 Hours
• Auto resume of process control after power restore in case of power cut
• Designed for unsupervised operation
• Notification of achieving process temperature set point via beep of onboard buzzer
• Internal battery backup for hot surface indication after the unit is switched off.
• Teflon powder coated SS-304 metal body for longer life, ideal for in Lab and Plant use.